By using rubber transfer application, you can customize your apron.
Rubber sheet requires cutting after printing. The inkjet printer performing both print and cut enables smooth production. After cutting, crimp the fabric and the printed rubber sheet with a flatbed heat press machine! Easy transfer to cloth materials such as aprons and T-shirts.
Since you can customize your favorite design layout freely, you can create only one original apron in the world.
1-1. Create freely an illustration by Illustrator.
1-2. Please open a new artboard of A4 size from [New] of [File]. Choose your favorite design and arrange it on the artboard.
(Register mark: Mark for cutting line detection)
For the first, please print the data on a rubber sheet using [CJV150 Series] for Print & Cut and RIP software [RasterLink].
2-1. Open [RasterLink] of the PC connected to the printer, [CJV150 Series], and input the data to confirm the print condition and print place.
Select ‘Print after RIP’ and click ‘Start’ to print.
Next, cut with [CJV150 Series] and [FineCut].
3-1. When the print is completed, open the data with Illustrator of the PC connected to the printer.
3-2. Hide every layer except the cutting lines and the register marks layers.
Click on the eye symbol in the layer menu to close the eye to hide a layer.
3-3. Select all the cutting lines and the register marks with [Ctrl] and [A] buttons and open the window for setting cutting condition of [FineCut].
Set the red pointer inside the corner of the register mark to recognize it.
3-5. Back to the PC window and click on the [Register Mark] tab and select [Detect Mark] to detect the register marks.
3-6. Click the [Plot] button to start cutting!
3-7. When cut is finished, the original rubber sheet is created!
[Preparation]
– Apron
– Printed rubber sheet
– Application sheet
– Parchment paper
– Squeegee
– Scissors
– Heat press machine
[Before starting the operation…]
– Set the temperature of the heat press to 150ºC / 302ºF for pre-heating.
– If wrinkles are found in the apron, iron it to let wrinkles stretch out.
* The rubber sheet may not be adhered well if there is unevenness on the fabric.
4-1. Cut the rubber sheet of favorite design.
4-2. Remove the unnecessary area.
4-3. Prepare the proper sized application sheet for the design to adhere it on the rubber sheet.
4-4. Push out the air between the rubber sheet and the application sheet by a squeegee.
4-5. Peel off the base paper of rubber sheet to adhere the rubber sheet to your favorite place of apron.
4-6. Place the apron on the heat press machine and cover it with a parchment paper.
4-7. Lower the lever, press for 5 seconds, and raise the lever.
4-8. Peel off the application sheet.
4-9. Press again for 10 seconds covered with the parchment paper.
4-10. After the 10 seconds, raise the lever to remove the parchment paper and finish!
SUBLIMATION TRANSFER PRINTERWith a sublimation transfer printer, you can easily make things in-house, from apparels… Read More
Grow with the most preferred digital photo presses https://www.youtube.com/watch?v=fHAdgkRBJJU HP’s digital print technology powers the… Read More
Unleash the future of print with a digital mindset. HP Indigo empowers you to break… Read More
A printed image on a translucent cloth creates an elegant and cool atmosphere. A folding… Read More
[Quick delivery, integrated production]It is available to realize the manufacture from sample proposal to small… Read More